Dreher S-70 Mechanical Grinding Compound 25 Kg
DREHER
If you are buying more than one, there may be a rounding difference. The correct final pricing will be shown on the checkout page.
250.45€ Inc Tax
Dreher's S-70 mechanical roughing compound has the property of performing a roughing process on the surface of the pieces, which is absolutely essential to carry out the next polishing step, being the beginning of the cycle that will end with the last polishing process final.
Especially suitable for noble metal alloys such as 9 and 18 k gold and silver. It is also suitable for very hard metals such as nickel and titanium.
How to use:
The pan should be filled with water to equal the level of the chips and plastic or ceramic chopsticks.
The amount of product depends a lot on how the pieces are and the quantity, we recommend starting with a tablespoon and adding more of the product depending on the result obtained with the initial dose.
Storage Mode:
Store according to local legislation. Observe the indications of the tag. Store the containers between 5 and 35 ° C in a dry and well-ventilated place, away from sources of heat and direct sunlight.
Keep away from oxidizing agents and strongly acidic or alkaline materials.
Especially suitable for noble metal alloys such as 9 and 18 k gold and silver. It is also suitable for very hard metals such as nickel and titanium.
How to use:
The pan should be filled with water to equal the level of the chips and plastic or ceramic chopsticks.
The amount of product depends a lot on how the pieces are and the quantity, we recommend starting with a tablespoon and adding more of the product depending on the result obtained with the initial dose.
Storage Mode:
Store according to local legislation. Observe the indications of the tag. Store the containers between 5 and 35 ° C in a dry and well-ventilated place, away from sources of heat and direct sunlight.
Keep away from oxidizing agents and strongly acidic or alkaline materials.
Reviews
There are no reviews for this product.