BT1 Extra Hard Varnish 1 Liter
TECHNOFLUX
If you are buying more than one, there may be a rounding difference. The correct final pricing will be shown on the checkout page.
61.45€ Inc Tax
Clear transparent varnish for metals. It protects from oxidation and improves abrasion resistance without altering the metal's tone.
Before varnishing, the parts must be clean, completely free of dust and grease.
To obtain a greater hardness of the varnish layer, you can use an oven, stove or infrared lamp.
Do not use dryers or other means that produce air currents because the varnish can lose its transparency and be affected by the suspended particles that can adhere to the surface of the treated piece.
Characteristics:
Color: Colorless
Drying: At room temperature
Maximum oven temperature: 100-200 °C
1 liter container
Application mode:
With a brush, spread a thin layer and let it dry in an area free from dust and draughts.
By immersion, dilute with 50% Solvent BT1 TECHNOFLUX (Ref. BAN050). Dip the parts and let them dry in a place free from dust and air currents, turning them over so they do not form bubbles.
With a spray gun, dilute the appropriate amount of BT1 TECHNOFLUX solvent (Ref. BAN050) to the thickness according to the desired spray.
In all three cases, if it is desired that the varnish layer has greater hardness, it can be plastered by any system.
The oven temperature ranges from 100 to 200 °C.
Let it dry in a place free from dust and drafts.
Before varnishing, the parts must be clean, completely free of dust and grease.
To obtain a greater hardness of the varnish layer, you can use an oven, stove or infrared lamp.
Do not use dryers or other means that produce air currents because the varnish can lose its transparency and be affected by the suspended particles that can adhere to the surface of the treated piece.
Characteristics:
Color: Colorless
Drying: At room temperature
Maximum oven temperature: 100-200 °C
1 liter container
Application mode:
With a brush, spread a thin layer and let it dry in an area free from dust and draughts.
By immersion, dilute with 50% Solvent BT1 TECHNOFLUX (Ref. BAN050). Dip the parts and let them dry in a place free from dust and air currents, turning them over so they do not form bubbles.
With a spray gun, dilute the appropriate amount of BT1 TECHNOFLUX solvent (Ref. BAN050) to the thickness according to the desired spray.
In all three cases, if it is desired that the varnish layer has greater hardness, it can be plastered by any system.
The oven temperature ranges from 100 to 200 °C.
Let it dry in a place free from dust and drafts.
- Availability: 1 In Stock
- Model: BAN032
- SKU: BAN0BU100
-
Brand:
Reviews
There are no reviews for this product.
